Filter
Top Products
62
5. When attaching a new Pick roller, insert the Pick roller so that its claw fits into the hole
on the Pick roller on the scanner.
Push in the claw and the center of the Pick roller by hand until it is completely inserted.
6. Attach the ADF paper chute.
7. Push in the center of the ADF to return it to its original position.
⇒ You should hear the ADF click when it returns to its original position.
8. Click the "ScanSnap! Monitor" icon in the task tray, and select [Check consumable
supplies...] from the menu that is displayed.
⇒ This displays the "Check consumable status" screen.
ATTENTION
Make sure that the Pick roller is completely attached. If the Pick roller is not
completely attached, document jams or other feed errors may occur.
Push in center.