Filter
Top Products
3.3 Loading Documents
ScanSnap! fi-4110EOX2 Operator's Guide 23
BASIC SCANNER OPERATIONS
3
3.3 Loading Documents
This section describes how to load documents on the document support.
1. Straighten the edges of the document.
1) Straighten both sides of the document stack.
2. Fan the documents
1) Take out the stack of documents of thickness 4 mm or less.
• A number of sheets A4/Letter or smaller in size up to 4 mm (50 sheets of 64 g/m
2
(17 lb) paper)
2) Hold both ends of the document with both hands, and bend the documents into an
arch.
3) Firmly holding the document with both hands, bend back the document as follows
so that the bent section rises up in the middle of the document.
4) Repeat steps 1) to 3) a few times.
5) Hold the other two sides of the document, and fan again.
4mm