BIOS Setup 17
CPU Features Submenu 3
Options for the CPU Features submenu are given in Table 3-9.
Table 3-9. CPU Features Submenu Options
Event Logging Submenu 3
The Event Logging Submenu allows you to configure DMI (Desktop Management Interface) event
logging options. To access this submenu, select Event Logging Submenu from the Advanced menu.
Option Settings Description
Processor Serial Number Enabled
Disabled
This option configures the Processor Serial Number
feature of Pentium III processor. This option is
accessible via DMI.
When [Disabled] is selected, the Processor Serial
Number feature is disabled.
When [Enabled] is selected, the Processor Serial
Number feature is enabled.
Table 3-10. Event Logging Submenu Options
Option Settings Description
Event Log Capacity Status of the event log is displayed.
Event Log Validity Indicates whether data in the event log is valid.
View Event Log Enter Press the <Enter> key or select the [Enter] option to
view the contents of the event log.
Event Logging Disabled
Enabled
Determines whether DMI event logging is enabled.
System Boot Event Disabled
Enabled
This option is only available when [Enabled] is
selected for Event Logging.
When [Enabled] is selected, the event may be
logged.
When [Disabled] is selected, the event is ignored.
Clear All Event Logs No
Yes
Choose [Yes] to clear all DMI event logs at the next
boot. (This setting is reset to No after the event logs
are cleared.)
Mark Events as Read Enter Press [Enter] or press the <Enter> key to mark all
events currently in the event log as read. Marked
events will not be displayed the next time View Event
Log is selected.
