BIOS Setup 24
Boot Menu Options 3
Boot menu options are described in Table 3-16.
Boot Device Priority Submenu 3
Table 3-17. describes settings in the Boot Device Priority submenu.
Table 3-16. BIOS Setup Boot Menu Options
Option Settings Description
QuickBoot Disabled
Enabled
Auto
Determines whether the full set of tests are run
during the Power-On Self Test (POST).
When [Enabled] is selected, a less extensive
memory test is performed and the size of installed
memory is not displayed during the memory test.
When [Auto] is selected, diagnostic tests will either
be skipped or performed according to the order of
the ACPI OS.
When [Disabled] is selected, the full set of tests is
run.
Boot Time Diagnostic Screen Disabled
Enabled
Determines whether status messages are displayed
as the Power On Self Test (POST) is performed.
Select [Enabled] to display messages.
If [Disabled] is selected, messages are not displayed
and the logo screen is displayed. (If POST errors
occur, POST messages are displayed regardless of
this setting.)
Preboot Execution
Environment
Disabled
Enabled
Determines whether the boot up from a network
server.
Select [Enabled] to allow the system to boot from a
network server (Preboot Execution Environment).
If [Disabled] is selected, this feature is disabled.
Boot Device Priority Submenu Select this submenu to configure the order in which
drives are searched for a bootable image.
Table 3-17. BIOS Setup Boot Sequence Submenu
Setting Description
1. [Floppy Disk Drive]
2. [Hard Disk Drive]
Determines the order that the systems searches
drives for a bootable image.
Tap on item 2 to change the boot sequence.
1. [Hard Disk Drive]
2. [Floppy Disk Drive]
