Filter
Top Products
IrDA Port 59
IrDA Port 6
The IrDA port on the Stylistic 3500 pen tablet is compliant with the Infrared Data Association (IrDA)
Standard Revision 1.1. Specifications for the IrDA port on the pen tablet are given in Table 6-7. Before you
can use the IrDA port, the Serial Port B Device BIOS option must be set to IrDA or FIR. See “Serial/
Parallel Port Configurations Submenu Options” on page 11 for details on BIOS options for the IrDA port.
Audio Jacks 6
All audio jacks on the Stylistic 3500 pen tablet and Stylistic 3500 port replicator are stereo mini jacks.
Some audio functions on the pen tablet are disabled when audio jacks are used. Table 6-8 shows which
audio inputs are disabled when inputs on the pen tablet and port replicator or mini-dock are used
(enabled). Table 6-9 shows which audio outputs are disabled when outputs on the pen tablet and port
replicator are used.
NA indicates that the condition does not apply. (The condition has no effect on the given input.)
Table 6-7. IrDA Port Specifications
Feature Specification
Standard supported IrDA Standard Revision 1.1
Distance Up to 1 meter point to point (environmental conditions affect usable range)
Conveyable wave Infrared rays (wavelength peak 875 nm)
Signal Send data / Receive data
Modulation/Data Rate IrDA SIR: 9.6 - 115.2 Kbps
IrDA FIR: 4,000.0 Kbps
Angle 0° to 15° from center of beam (30° viewing angle)
Table 6-8. Active Audio Inputs
Input Activity
Pen Tablet Port Replicator/Mini-dock
Microphone
(built-in)
Microphone
Input Jack
Microphone
Input Jack
Line Input
Jack
Microphone On
(microphone built into pen tablet)
Enabled Plug not
inserted
Plug not
inserted
NA
Pen tablet Microphone jack used
(external microphone connected)
Disabled Enabled Plug not
inserted
NA
Port replicator Microphone jack used
(external microphone connected)
Disabled Disabled Enabled NA
Port replicator Line In jack used NA NA NA Enabled