Filter
Top Products
31
11-2-2. Server Switching Using the UP/DOWN Switching Method (SELECT-B)
i. When a cascade connection is not used
The server can be selected by pressing the [ServerSelection] switch.
When this switch is pressed, servers without power can also be selected.
When M1 (as shown in the diagram below) is selected and the [ServerSelection] switch (right)
is pressed, M2 is selected.
In addition, when M1 is selected and the [ServerSelection] switch (left) is pressed, M8 is
selected.
Key typer (server quick selection) is not enabled by pressing the [ServerSelection] switch for a
long time.