Filter
Top Products
41
The background of server name characters becomes pink. Ports of servers with power can be
automatically switched at fixed intervals (the default value is ten seconds). The switching
interval can be set to 3, 5, 10, 20, 40, or 60 seconds. Pressing <↑> reduces the time and
pressing <↓> increases the time. Note that key input and mouse operation to the server cannot
be used in the AutoScan mode.
When the [AutoScan] switch, <Enter>, the left mouse button, or the central mouse button is
pressed, the current screen is selected and the AutoScan mode ends.
When either the <ESC>, <Ctrl> + <Alt> + <Shift> buttons are pressed at the same time or the
right mouse button is pressed, the previous screen when the AutoScan mode was started is
displayed and the AutoScan mode ends.
11-3. Constant Server name display on the OSD
If <ScrollLock> or <NumLock>is pressed twice in succession while holding the <Shift> key
down, the server name of the selected ports can be always displayed on the OSD.