Fujitsu GBR-222200-002 Tablet User Manual


 
8
Stylistic ST5100 Series Tablet PC User’s Guide – Section One
Table 1-1. System Status Indicators
Battery On State
Idle Mode
Green, continuous Battery charge is between 50%-100%
Amber, continuous Battery charge is between 13%-49%
Red, continuous Battery charge is between 0%-12%
Red, blinking There is a battery error.
Standby,
without AC adapter
Standby with AC
adapter
Green, blinking slow Battery charge is between 50%-100%.
Amber, blinking slow Battery charge is between 13%-49%.
Red, blinking slow Battery charge is between 0%-12%.
•Hibernate,
with AC adapter
Off State
Off Battery is not installed, or system is off or in
Hibernate mode.
•Hibernate,
without AC adapter
If battery is inserted during power off, LED blinks
amber for 4 seconds to detect battery. Battery
status is displayed for 5 seconds after that.
HDD Access On State (or
flashing)
Idle Mode
Green Displayed when hard disk drive is accessed.
Standby
•Hibernate
Off State
Off Hard disk drive is not being accessed.
Security On State Green, continuous
(until password is
entered)
The Security Indicator lights (if a password was
set) when the system resumes from Off or
Standby modes. You must enter the password
that was set in the Security Panel before your
system will resume operation.
(See Security
Functions of Application Buttons on page 13 for
more information.)
In the following table, a “blinking” LED flashes at the rate of once per second; an LED that is “blinking, slow” flashes at the
rate of one second on, five seconds off.
Icon Mode/State LED State Remarks
Osian_UG.book Page 8 Monday, October 9, 2006 1:24 PM