Filter
Top Products
16
Stylistic ST5100 Series Tablet PC User’s Guide – Section One
CONNECTORS AND PERIPHERAL INTERFACES
Connectors and peripheral interfaces on the Stylistic
ST5100 Series Tablet PC allow the connection of a
variety of devices. Specific locations are illustrated in
Figures 1-2 through 1-5.
Table 1-6 provides a description of each peripheral
connector on the Stylistic ST5100 Series Tablet PC. Each
of the illustrated icons is either molded into or printed
on the Tablet PC chassis.
Connector/
Peripheral
Tablet PC
Icon
Purpose
DC input
connector
Connect an external power source such as the AC adapter or auto/airline
adapter.
USB Port Connect Universal Serial Bus 2.0 compliant devices to the Tablet PC.
PCMCIA
Card slot
Insert a Type I or Type II PC Card.
SD Card/
Memory Stick
slot
Insert a Secure Digital (SD) Card or a Memory Stick.
Microphone jack Connect an external microphone. The internal microphone is disabled when you
plug in an external microphone.
Headphone jack Connect stereo headphones or powered external speakers. The internal speaker
is disabled when you plug in external headphones or powered speakers.
IrDA/FIR port An infrared transceiver built into the Tablet PC allows you to communicate with
other devices that are compliant with the IrDA Standard Rev. 1.1. Effective range
for infrared communication is about 3 feet, and within 15 degrees off center. A
clear line-of-sight path must exist between the IrDA port on the Tablet PC and
the IrDA transceiver on the other device.
Modem Connect a telephone line to the optional internal modem using a standard RJ-11
telephone plug.
Tablet Dock port Connect the Stylistic ST5100 Series Tablet Dock or other approved docking
device. Refer to documentation accompanying the docking device for more
information.
Infrared
keyboard/
mouse port
An infrared receiver built into the Tablet PC allows you to communicate with a
Fujitsu wireless infrared keyboard or mouse. The keyboard infrared port works
optimally when it is placed between 10 to 30 cm (approximately 4 in. to 12 in.)
from the keyboard infrared port (which is located on the bottom edge of the
Tablet PC). Ensure there is a clear line-of-sight path between the infrared receiver
on the Tablet PC and the infrared transmitter on the keyboard or mouse. Note
that an infrared keyboard or mouse works best when the system is in landscape
orientation.
Osian_UG.book Page 16 Monday, October 9, 2006 1:24 PM