Filter
Top Products
59
Using the WIreless LAN
I want to remove the
driver
(Windows 2000)
Windows 2000:
When removing the driver, make sure that the device is attached to
the computer. If you try to remove the driver while the device is
detached from the computer, the driver is not removed.
1. Right click the [My Computer] icon on the desktop, and then
click [Properties] from the menu that appears. [System Proper-
ties] appears.
2. Click the [Hardware] tab.
3. Click [Device Manager...]. The [Device Manager] window
appears.
4. Click [+] beside [Network adapters].
5. Right click [Intersil PRISM Wireless LAN PCI Card], and
click [Uninstall] from the menu that is displayed. [Confirm
Device Removal] appears.
6. Click [OK].
7. Close [System Properties]. Make sure that the icon has disap-
peared from the task tray in the lower right corner of the screen.
8. Click [Start] -> [Settings] -> [Control Panel].
9. Double-click [Add/Remove Programs]. [Add/Remove Pro-
grams] appears.
10. Perform the following steps.
■
Click [PRISM 11Mbps Wireless LAN for Windows].
■
Click [Change/Remove].
11. A window appears asking you if you really want to remove the
driver.
12. Click [Yes]. When the driver is removed, a window appears
showing that the driver has been removed.
13. Click [OK].
14. Close [Add/Remove Programs] and [Control Panel].
15. Shut down Windows, and turn off the computer.
Problem Possible Cause Possible Solution
P Series.book Page 59 Monday, May 13, 2002 2:44 PM