Filter
Top Products
1-8
Operation status
Operation status is indicated by the following message:
<Power-on>
When the lamps are ready to read, the screen changes to the initial
screen of the simplex or duplex reading mode.
<Warning>
<Reading counter>
The upper line displays the current read mode for front-side reading.
The lower line is blinking and displays the ink empty of print head after
the scanning operation.
This warning display will be reset, when the covers are opened, or
Stop
is pressed, or Start command is issued. The operator must
change the print head and reset the life counter. (See Chapter 6
ENDORSER.)
Example of simplex reading:
The reading counter is displayed after a read operation starts.
The reading counter disappears when:
• The next scanning starts.
• The valid switches are pressed.
• The error is cleared.
Reading
counter
XX
XX
X
XXX
INK EMPTY
XXX
SF A4 40 0
X
XX
L. >
Wa
r
mi ng
_
up Now !!
03-Chap. (1) 98.2.20, 10:49 AM8