Filter
Top Products
GL-6
Pre-picking
A setting in which a document to be read next is placed at the front of the reading unit while the previous
document is read. Setting the pre-picking makes the process speedier.
Print head
A cartridge located in the endorser (optional). It contains the ink reservoirs and creates the ink droplets.
It is replaceable by operator.
Print head life counter = ink counter
A counter which accumulates the number of the printed dots. When the accumulated number exceeds
a specified value, “INK EMPTY” appears.
Print number reset method
Determines whether or not to reset the number printed by the endorser to zero. This scanner can be set
so that the number is reset when the hopper empty is detected.
Readable status
A status when the power is turned on or when reading is activated by the command from the host computer.
Reading counter
Indicates the total number of read document from reading start until the hopper becomes empty.
Read operation
Refers to the reading operation including Simplex reading and Duplex reading.
Reset method of endorser
Refer to “Print number reset method”.
RS-232C interface
A type of serial interface. See Serial interface.
SCSI-ID
Used to specify a particular SCSI device when the initiator selects a target or the target re-connects to the
initiator.
16-GL 98.2.20, 10:59 AM6