Filter
Top Products
7-5
3 If you press the
Mode 2
at Sccreen 9,
you return to screen 8.
The setting is stored to EEPROM.
If you press the
Mode 2
at screen 10,
you go to screen 11. (Screen 12 in case
of M3099GH/GX)
4 If you press the
Mode 1
at screen 11/12,
IPC-2 pre-set mode can be not used.
Also the setting is changed to “No”
obligatory and stored to EEPROM. If
you press the
Mode 2
at screen 11/12,
IPC-2 pre-set mode can be used and the
setting number is stored to EEPROM.
When you close the setup mode, press
Stop
.
No-Mode 1 Yes-Mode 2
Panel/Host Set Ignore
<Screen 11>
<Screen 12>
X
IPC-2 SET
<Screen 10>
Background density
Normal← →Dark
Normal
↑
↓
Light
q:Normal background
and character.
w:Normal background
and light character.
Background color
Red Green Blue
r:Light character
on red paper.
e:Dark background
and normal-density
character.
t:Light character
on green paper.
q - t are the pattern number set in setup mode.
Character
density
<Classification of user’s paper>
User’s paper are classified in line-art scanning as follows:
The horizontal axis shows the background density/color of paper.
The vertical axis shows the density of charcter/ line.
No-Mode 1 Yes-Mode 2
Host Set Ignore
15-Chap. (7) 98.2.20, 10:56 AM5