Filter
Top Products
10 SPARC Enterprise M8000/M9000 Servers Product Notes for XCP Version 1060 • November 2007
Software Issues
This section describes software specific issues and workarounds.
XCP Issues and Workarounds
TABLE 3 lists known XCP issues and possible workarounds.
TABLE 3 XCP Issues and Workarounds
ID Description Workaround
RTIF1-
070418-009
While XSCF is running, a process may go
down, a watchdog timeout may occur, or a
hang-up may occur. After this, XSCF may
reset.
Check that XSCF is started. If not started, use
the rebootxscf(8) command to restart XSCF,
or stop all the domains and then execute the
system power off/on (AC OFF/ON).
RTIF1-
070528-002
While XSCF is running, watchdog timeout
may occur and XSCF may reboot.
Check that XSCF is started. If not started, use
the rebootxscf(8) command to restart XSCF,
or stop all the domains and then execute the
system power off/on (AC OFF/ON).
RTIF1-
070823-001
Using the XSCF Web, when you selected SSH
on the snapshot screen, the maximum number
of character input for Host, Directory, ID, and
Password doesn't correspond to the maximum
number of character input on the XSCF Shell.
To specify the value which exceeds the
maximum number of character input for the
XSCF Web, use XSCF Shell.
RTIF1-
070823-003
When you display the Logical tree on the
XSCF Web, the hardware configuration of CPU
or memory which assigned to the domain
appears differently from the actual domain
configuration.
On the Menu, select Device Status to refer to
the domain hardware configuration. Or use the
showdevices(8) command to refer to the
domain hardware configuration.
RTIF1-
070824-002
On the XSCF Web, when you select Domain
Mode Configuration to perform various
settings, the pop-up screen may not appear but
"Undefined" may be displayed on the screen.
Select Domain Mode Configuration one more
time and perform the settings. Or once
terminate the XSCF Web and then perform the
settings.
RTIF1-
070824-004
On the XSCF Web, on the Domain Status
screen, when you select an XSB displayed on
the Domain Component List, and in case the
selected XSB is not yet mounted or is Uni-XSB,
the pop-up screen displays no data.
None available at this time.