Filter
Top Products
SPARC Enterprise M8000/M9000 Servers Product Notes 11
RTIF1-
070824-005
On the XSCF Web, when you changed the
Refresh Interval value of the Monitor Message
Frame, the invalid pop-up "Confirmation
Domain mode" may appear.
Ignore the pop-up and close the screen.
RTIF1-
070824-006
On the tab browser, to the same host, when
you perform multiple log-in with the user
accounts of different user privileges, the user
privilege of the last log-in user account will be
applied to those pages which you've already
logged in.
When you use the tab browser, do not perform
multiple log-in to the same host.
RTIF1-
070824-008
On the Domain Configuration screen, when
you select an undefined Domain ID, the
Configuration Policy remains as the content
which previously displayed.
None available at this time.
RTIF1-
070824-011
While using FireFox2, in the Configuration
policy setting on the Domain Configuration
screen, when you specify a domain which is in
operation, an error display pop-up appears.
When you click on the Back button on this
error display pop-up and click on the Cancel
button on the inquiry screen to re-display the
data, the system remains in the error message
screen.
From the Menu, select the Domain
Configuration page again.
RTIF1-
070904-001
CLIs should display "Permission denied" when
it is executed in Standby XSCF.
Only the following CLIs can be executed on
the Standby XSCF: snapshot(8),
switchscf(8).
Do not attempt to run any other CLI on the
Standby. Such attempts will report various
errors.
RTIF1-
070904-003
An incorrect domain state is reported. After
the command sendbreak(8) to domain is
issued, showdomainstatus(8) continues to
show the state as "Running" when the domain
is actually at "ok" prompt.
There is no workaround. This is expected
behavior of the sendbreak(8) operation.
RTIF1-
070904-004
The latest communication field in
showarchiving(8) command is not updated
regularly.
Disabling and re-enabling archiving refreshes
the Latest communication field in
showarchiving(8) output.
RTIF1-
070904-006
While executing the domain power-on,
domain reset or DR, in case the XSCF reboot
occurred, the process may be aborted in some
or all of the XSB.
Execute the domain reset one more time, or
power off the domain and then power on
again.
TABLE 3 XCP Issues and Workarounds (Continued)
ID Description Workaround