Filter
Top Products
80 SPARC Enterprise Mx000 Servers Administration Guide • April 2007
1. Log in to the XSCF console with platadm privileges.
2. Type the addcodlicense command:
where license-signature is the complete COD license key. For example:
3. Verify that the license key was added to the license database by typing the
showcodlicense -r command.
The COD RTU license key that you added should be listed in the showcodlicense
output. See “To Display COD License Status” on page 84.
▼ To Delete a COD License
Before deleting a license, the COD software determines whether sufficient licenses
are available from the pool of installed licenses plus headroom. If all licenses are in
use and no headroom is available, the operation will fail. You can force the operation
by using the -f option in Step 3, but doing so will overcommit any license
reservations that might be in effect.
1. Log in to the XSCF console with platadm privileges.
2. Verify that you have enough licenses or headroom to cover COD resources
currently in use.
Use the showcodlicense command, as described in “To Display COD License
Status” on page 84. If you do not have sufficient licenses or headroom to
compensate, power off one or more domains or disconnect the appropriate number
of boards.
3. Type the deletecodlicense command:
where license-signature is the complete COD license key.
XSCF> addcodlicense license-signature
XSCF> addcodlicense \
01:84000000:104:0301010100:3:00000000:xxxxxxxxxxxxxxx
XSCF> deletecodlicense license-signature