Filter
Top Products
Preface xvii
Preface
The SPARC Enterprise M4000/M5000/M8000/M9000 Servers Administration Guide
describes the system configuration procedures, which focuses on the initial settings
of the SPARC Enterprise M4000/M5000/M8000/M9000 servers. This document
describes the settings of service processors which embedded in the SPARC
Enterprise M4000/M5000/M8000/M9000 servers and also refers to the settings of
the Solaris
TM
Operating System, accompanied by the service processors settings.
This document targets at every model of the SPARC Enterprise
M4000/M5000/M8000/M9000 servers; however, in some parts, describes the content
specific to the model, such as the midrange (SPARC Enterprise M4000/M5000)
servers or the high-end (SPARC Enterprise M8000/M9000) servers. Please refer to
the part relevant to the model in use.
To better understand the content of this document, it is recommended to read the
following manuals together.
■ About the hardware:
The SPARC Enterprise M8000/M9000 Servers Overview Guide or the SPARC
Enterprise M4000/M5000 Servers Overview Guide
■ About the eXtended System Control Facility (XSCF) firmware in the service
processor:
SPARC Enterprise M4000/M5000/M8000/M9000 Servers XSCF User’s Guide
SPARC Enterprise M4000/M5000/M8000/M9000 Servers XSCF Reference Manual
This section includes:
■ “Audience” on page xviii“
■ “Structure and Contents of This Manual” on page xviii
■ “SPARC Enterprise Mx000 Servers Documentation” on page xix
■ “Abbreviated References to Other Documents” on page xxii
■ “Models” on page xxiii
■ “Text Conventions” on page xxiii
■ “Prompt Notations” on page xxiv
■ “Syntax of the Command Line Interface (CLI)” on page xxiv
■ “Software License” on page xxv