Filter
Top Products
Chapter 3 System Configuration 29
▼ To Display DSCP Network Configuration
1. Log in to the XSCF console with platadm, platop,orfieldeng privileges, or
domainadm, domainop,ordomainmgr privileges for a specific domain.
2. Type the showdscp command:
Command output example for a DSCP network of 10.1.1.0 and a DSCP netmask of
255.255.255.0 is:
▼ To Configure the XSCF Network Interfaces
Settings to configure the XSCF network must be applied to XSCF, and the Service
Processor must be reset, before the settings become effective. See “To Set Or Reset
the XSCF Network” on page 31.
1. Log in to the XSCF console with platadm privileges.
2. Type the setnetwork command:
XSCF> showdscp
XSCF> showdscp
DSCP Configuration:
Network: 10.1.1.0
Netmask: 255.255.255.0
Location Address
XSCF 10.1.1.1
Domain #00 10.1.1.2
Domain #01 10.1.1.3
Domain #02 10.1.1.4
Domain #03 10.1.1.5
...