Filter
Top Products
36 SPARC Enterprise Mx000 Servers Administration Guide • April 2007
b. To set the timezone:
where timezone is the timezone you want to set. For more information on the
settimezone command, including setting Daylight Saving Time, refer to the
settimezone(8) man page or to the Reference Manual.
3. To verify the operation, type the showtimezone command.
4. Type the setdate command:
where date is the date and time you want to set. For more information on the
setdate command, refer to the setdate(8) man page or to the Reference Manual.
5. After specifying the date, you are prompted to reset the Service Processor, so that
the date and time become effective. Type Y to reset the Service Processor.
6. To verify the operation, type the showdate command.
▼ To Create a USM User Known to the SNMP
Agent
A USM user known to the SNMP agent is not required to have a regular user
account on the Service Processor.
1. Log in to the XSCF console with platadm privileges.
2. Type the setsnmpusm command.
You can use one of two methods to add USM users, as follows:
XSCF> settimezone -c settz -s timezone
XSCF> showtimezone
XSCF> setdate -s date
XSCF> showdate