Filter
Top Products
Important Alert Items
vi C156-E224-01EN
Task Alert message Page
Device damage:
Be sure to turn on the power supply before inserting your
cartridge for the first time. It releases the device from
transport protection and enables you to insert the cartridge.
The device may be damaged if you insert the cartridge
without releasing the protection. From the next time, you
don't need to turn on the power supply beforehand.
Before moving the drive, remove the optical disk cartridge. If
the drive is moved with the optical disk cartridge loaded in it,
the head may move back and forth in the drive to damage the
head or disk and reading the data may fail.
3-22
• Make sure that the system power is off.
• Do not connect or disconnect any cable when the power is
on.
3-25
Device damage:
Before demounting the optical disk drive, turn off the system
power. Do not remove screws securing the cables and drive
when the power is on.
3-27
Device Damage:
Be sure to use the dedicated head cleaner described above.
5-6
Damage for data medium:
Do not use this cleaning kit for the floppy disk or the optical
disk cartridge used for other optical disk drive.
5-12
Damage for disk medium:
Clean the cartridge at clean place. Put a disposable groves at
cleaning so that the fingerprint does not put on the disk media
(recommendation).
5-12
Damage for disk medium:
At setting the cartridge to the setting case, do not apply the
heavy shock and push hardly.
5-13
Eye inflammation:
In case of contact with eyes, immediately flush eyes with
water.
5-14
Data loss:
In case of regular repair, the optical disk cartridge should not
be attached except where the cartridge causes the error. And
before having the drive repaired, save the data in the
cartridge. Fujitsu is not responsible for data lost during
maintenance or repair.
6-3