Fujitsu MCJ3230SS Computer Drive User Manual


 
4.3 SCSI Commands
C156-E224-01EN 4-29
Table 4.46 ASC and ASCQ definitions
Sense
Key
ASC ASCQ Error description
2 04 00 LOGICAL UNIT NOT READY, CAUSE NOT REPORTABLE
2 04 04 LOGICAL UNIT NOT READY, FORMAT IN PROGRESS
3 09 00 TRACK FOLLOWING ERROR
4 08 03 LOGICAL UNIT COMMUNICATION CRC ERROR
3 09 01 TRACKING SREVO ERROR
3 0C 00 WRITE ERROR
3 0C 02 WRITE ERROR/AUTO REALLOCATION FAILED
3 10 00 ID CRC ERROR
3 11 00 UNRECOVERED READ ERROR
3 15 02 POSITIONING ERROR DETECTED BY READ OF MEDIUM
1 17 06 RECOVERED DATA WITHOUT ECC/DATA AUTO
REALLOCATED
11800
RECOVERED DATA WITH ERROR CORRECTION & RETRIES
APPLIED
1 19 00 DEFECT LIST ERROR
3 19 01 DEFECT LIST NOT AVAILABLE
3 19 02 DEFECT LIST ERROR IN PRIMARY LIST
3 19 03 DEFECT LIST ERROR IN SECONDARY LIST
1 1C 00 DEFECT LIST NOT FOUND
5 20 00 INVALID COMMAND OPERATION CODE
5 21 00 LOGICAL BLOCK ADDRESS OUT RANGE
5 24 00 INVALID FIELD IN COMMAND PACKET
5 25 00 LOGICAL UNIT NOT SUPPORTED
5 26 00 INVALID FIELD IN PARAMETER LIST
7 27 00 WRITE PROTECTED
62800
NOT READY TO READY TRANSITION, MEDIUM MAY HAVE
CHANGED
6 29 00 POWER ON, RESET DEVICE RESET OCCURRED
3 30 00 INCOMPATIBLE MEDIUM INSTALLED
3 30 01 CANNOT READ MEDIUM/UNKNOWN FORMAT
3 31 00 MEDIUM FORMAT CORRUPTED
3 31 01 FORMAT COMMAND FAILED
3 32 00 NO DEFECT SPARE LOCATION AVAILABLE
3 32 01 DEFECTLISTUPDATEFAILURE
1 37 00 ROUNDED PARAMETER
2 3A 00 MEDIUM NOT PRESENT
4 40 NN DIAGNOSTIC FAILURE ON COMPONENT NN
4 44 00 INTERNAL TARGET FAILURE
4 4A 00 COMMAND PHASE ERROR
4 4B 00 DATA PHASE ERROR