Filter
Top Products
Installation Requirements
3-20 C156-E224-01EN
When the write cache feature is enabled, a write error is reported at
the completion status of next command. At a system so that the
initiator retries the command, a retry process may be failed.
(4) Spindle automatic stop mode
The optical disk drive automatically enters standby mode if it receives no
commands from the host for about 32 minutes (default value).
Table 3.8 Spindle motor automatic stop mode setting
Spindle motor automatic stop mode (11-12)
The spindle motor automatically stops after a
specified period of time.
SHORT
The spindle motor does not stop. OPEN *1
*1 Factory setting