Filter
Top Products
4.3 SCSI Commands
C156-E224-01EN 4-21
If the Streaming Mode (SM) bit is 0, a test write operation may interrupt a read or
write operation. If the bit is 1, the test write operation is suppressed during
continuous read or write operation. Fujitsu recommends setting the SM bit to 0.
Verify Mode (VM) specifies a verify operation for the WRITE command.
Table 4.28 Verify mode
VM Description
0 Always enable verify operation.
1 Always disable verify operation.
2 Conditionally enable verify operation (verify skip mode).
3 Reserved
DevType specifies the device type that is returned in response to the Inquiry
command. To validate the specified value, save it, then turn the power off and on
again.
The values in the Verify control page can be saved.
Table 4.29 Variable values in the Verify control page
Bit
Byte
76543210
2 1 1 0 11b
3 0 1Fh
4-7 0
Table 4.30 Default values in the Verify control page
Bit
Byte
76543210
2 1 0 0 00b
30 0h
4-7 0