Filter
Top Products
56 Operating manual RX330 S1
Switching the server on and off Starting up and operation
5.2 Switching the server on and off
V CAUTION!
If nothing appears on the screen but flickering stripes after switching on
the server, switch the server off immediately (see section “Flickering
stripes on monitor screen” on page 65).
The On/Off button does not disconnect the server from the mains. To
disconnect from the mains completely, remove the power plug(s).
Switching the server on
The power-on indicator (item 10 in figure 11 on page 49) lights red.
– Starting up for the first time:
Ê Press the On/Off button (position 7 in figure 11 on page 49).
The power-on indicator lights up green (item 10 in figure figure 11 on
page 49).
Ê Insert ServerStart disc 1 in the CD/DVD drive.
Ê Follow the on-screen instructions (see also section “Configuration with
ServerStart” on page 59 or section “Configuration without ServerStart”
on page 60).
– System already installed:
Ê Press the On/Off button (position 7 in figure 11 on page 49).
The power-on indicator lights up green (item 10 in figure figure 11 on
page 49).
The server is switched on, performs a system test and boots the
operating system.