Filter
Top Products
RX330 S1 Operating manual 71
Hot-plug components Hot-plug power supply units
8.1.2 Installing/removing the hot-plug power supply unit
Figure 17: Unlocking and installing the power supply unit
Ê Fold down the locking lever (1) and slide the power supply unit into the
mounting location (2) as far as it will go.
The locking lever will turn upwards and engage.
Ê Check that the locking lever is properly locked in place.
If necessary, push the lever up.
Ê Connect the power supply unit to the mains (see section “Connecting the
server to the mains” on page 47).
To remove the server, follow this procedure in reverse.
1
2
1
2