Filter
Top Products
70 Operating manual RX330 S1
Hot-plug power supply units Hot-plug components
8.1.1 Remove the dummy module
The mounting location for the second hot-plug power supply unit contains a
dummy module. This dummy module must be removed before installing a
second power supply unit.
Figure 16: Remove the dummy module
Ê Loosen the fixing screw (1) and remove the dummy module from the second
power supply mounting location (2).
V CAUTION!
Store the dummy module in a safe place. If the power supply unit is
removed and not replaced with a new unit, the dummy module must be
reinstalled due to cooling, to comply with applicable EMC regulations
(regulations on electromagnetic compatibility) and to protect against fire.
1
2
1
2