Filter
Top Products
RX330 S1 Operating manual 75
Hot-plug components Hot plug hard disk drives
8.2.1 Handling hard disk drives and HDD modules
Hard disk drives incorporated in the HDD modules are highly sensitive electro-
magnetic devices and must be handled with great care. Incorrect handling can
cause partial or total failure of the hard disk drives. These failures can result in
data errors and to a loss of data or to total corruption of the hard disk drive.
Observe the following rules to prevent such problems occurring:
● Only store and transport HDD modules within the limits stipulated in the
specification.
● When transporting HDD modules (even over short distances), always use
the original packaging (ESD label).
● Never expose HDD modules to a temperature shock. Avoid the formation of
condensation inside and on the outside of the hard disk drive.
V CAUTION!
The HDD module must be acclimatized in its operating environment
for an acclimatization time before it is started up for the first time.
● Always set the HDD module down carefully, with the large surface facing
downwards to prevent it from tipping over.
Temperature difference (°C)
(operating
environment/outside)
Minimum acclimatization time
(hours)
53
10 5
15 7
20 8
25 9
30 10
Table 2: Acclimatization times for HDD modules