Filter
Top Products
RX330 S1 Operating manual 73
Hot-plug components Hot plug hard disk drives
8.2 Hot plug hard disk drives
Up to six hot-plug hard disk drives can be installed in the PRIMERGY RX330 S1
Server.
The hard disk drives which can be ordered for the PRIMERGY RX330 S1 are
supplied already mounted in an installation frame so that defective hard disk
drives can be replaced and new drives can be added during operation. The
HDD drive and installation frame together make up the HDD module.
V CAUTION!
● The HDD must not be removed from the installation frame by anyone
except a service technician.
● The HDD modules (drives) must all be marked clearly so that they
can be put back in their original places after an upgrade. If this is not
done, existing data can be lost.
● The hot-plug function is only possible in conjunction with a corre-
sponding RAID configuration.
Further information about RAID configuration or the RAID level can
be found in the RAID controller documentation (see “Literature” on
page 87).
V CAUTION!
Hybrid operation using both SAS and SATA2 hard disk drives is not
supported.