Filter
Top Products
RX330 S1 Operating manual 59
Starting up and operation Configuring the server
5.3.2 Configuration with ServerStart
With the ServerStart Disc 1 provided, you can configure the server and install the
operating system in a convenient manner. Menu-guided configuration includes
server configuration with the SCU and RAID controller configuration with
ServerViewRAID.
The ServerStart advantages
– Automatic configuration of your server’s hardware and disk arrays.
– Installation assistance for all leading server operating systems.
– Creation of configuration files for unattended installation of several
PRIMERGY servers with identical hardware configurations.
– Installation of drivers and additional software.
I The software that can be installed depends on your server’s hardware
configuration. This configuration is detected automatically.
I Descriptions of operating systems not covered in the RAID controller
manual are provided in the appropriate readme files on the driver CDs.
To find out how to operate ServerStart and for further information, refer to the
corresponding manual (see “Literature” on page 87).
If you are using ServerStart, you can skip the following section on how to
configure the server and install the operating system. Continue from the
“Cleaning the server” on page 60 section.