Filter
Top Products
Index-4 SPARC Enterprise T2000 Server Service Manual • April 2007
rear panel, 3-9
Service Required, 3-10
Top Fan Fault, 3-10
locating the server, 3-10
locating the server for maintenance, 5-3
location of connectors, 2-9
Locator LED/button, 3-10, 5-3
log files, viewing, 3-45
M
maintenance position, 5-3
extending server to, 5-3
MB (motherboard FRU name), A-4
memory
configuration, 3-6
configuration guidelines, 6-4
fault handling, 3-6
overview, 2-4
ranks, 6-4
memory access crossbar, 2-3
memory also see DIMMs
message ID, 3-40
messages file, 3-45
motherboard, A-4
cables, reconnecting, 5-27
removing, 5-19
removing cables, 5-20
replacing, 5-23
screw locations, 5-26
motherboard washer, 5-26
N
names of FRUs, A-1
O
OK LED, 3-10
OK to Remove LED, 3-11
operating state, determining, 3-10
OSP card, A-4
Overtemp LED, 3-11, 4-2
P
parity checking, 2-7
parts, replacement see FRUs
PCI (PCIE and PCIX FRU names), A-4
PCI capabilities, 6-7
PCI hold-down bracket, 5-10
PCI-E and PCI-X cards
adding, 6-7
designations, A-4
replacing, 5-11
PCI-E and PCI-X interface specifications, 2-4
PDB (power distribution board FRU name), A-5
performance enhancements, 2-3
platform name, 2-4
POST detected faults, 3-4, 3-21
POST see also power-on self-test (POST), 3-26
power cords
disconnecting, 5-6
reconnecting, 5-45
power distribution board (PDB), A-5
cables, 5-28
removing, 5-27
replacing, 5-30
Power OK LED, 3-4, 3-10
Power On/Off button, 3-10, 5-3
power specifications, 2-4
power supplies, 4-2, A-5
fault LED, 4-4
hot-swapping, 4-4
latches, 5-27
LEDs, 3-12
redundancy, about, 2-7
replacing, 4-6
status, displaying, 3-22
powercycle command, 3-19, 3-32, 3-37
powering off the server, 5-2
powering on the server, 5-45
poweroff command, 3-19, 5-2
poweron command, 3-19, 5-15
power-on self-test (POST), 3-5
about, 3-26
ALOM CMT commands, 3-27
configuration flowchart, 3-29
error message example, 3-35
error messages, 3-35
example output, 3-33
fault clearing, 3-39
faulty components detected by, 3-39
how to run, 3-32
parameters, changing, 3-30