Fujitsu T2000 Server User Manual


 
xxii SPARC Enterprise T2000 Server Service Manual April 2007
Caution The following tasks regarding this product and the optional products
provided from Fujitsu should only be performed by a certified service engineer.
Users must not perform these tasks. Incorrect operation of these tasks may cause
malfunction.
Unpacking optional adapters and such packages delivered to the users
Also, important alert messages are shown in “Important Alert Messages” on
page xxii.
Notes on Safety
Important Alert Messages
This manual provides the following important alert signals:
Caution This indicates a hazardous situation could result in minor or moderate
personal injury if the user does not perform the procedure correctly. This signal also
indicates that damage to the product or other property may occur if the user does
not perform the procedure correctly.
Task Warning
Maintenance Electric shock
The system supplies standby power to the circuit boards even when the
system is powered off.
Extremely hot
The system controller card can be hot. To avoid injury, handle it carefully.
Damage
The server weighs approximately 40 lb. (18 kg). Two people are required
to dismount and carry the chassis.
The system supplies power to the power distribution board even when
the system is powered off. To avoid personal injury or damage to the
system, you must disconnect all power cords before servicing the power
distribution board.