Filter
Top Products
Chapter 3 Server Diagnostics 3-25
3.3.4 Running the showfru Command
The showfru command displays information about the FRUs in the server. Use this
command to see information about an individual FRU, or for all the FRUs.
Note – By default, the output of the showfru command for all FRUs is very long.
● At the sc> prompt, enter the showfru command.
In the following example, the showfru command is used to get information about
the motherboard (MB).
sc> showfru MB.SEEPROM
SEGMENT: SD
/ManR
/ManR/UNIX_Timestamp32: WED OCT 12 18:24:28 2005
/ManR/Description: ASSY,SPARC-Enterprise-T2000,CPU Board
/ManR/Manufacture Location: Sriracha,Chonburi,Thailand
/ManR/Sun Part No: 5016843
/ManR/Sun Serial No: NC00OD
/ManR/Vendor: Celestica
/ManR/Initial HW Dash Level: 06
/ManR/Initial HW Rev Level: 02
/ManR/Shortname: T2000_MB
/SpecPartNo: 885-0483-04
SEGMENT: FL
/Configured_LevelR
/Configured_LevelR/UNIX_Timestamp32: WED OCT 12 18:24:28 2005
/Configured_LevelR/Sun_Part_No: 5410827
/Configured_LevelR/Configured_Serial_No: N4001A
/Configured_LevelR/HW_Dash_Level: 03
.
.
.