Filter
Top Products
XG2600 Hardware Guide Chapter 1 Getting Started
Items in the Package / Names and Functions
17
• SFP+ Dummy Caps (Qty 26)
Dummy caps to prevent dust when the SFP+ slots are open and unplugged.
The dummy caps come with the switch, installed on the slots at the time of purchase.
• Rack Mounting Rails (1 set)
Rails for mounting the switch in a rack.
• M6 Countersunk Screws (Qty 4)
Screws for fastening the rack rails to the front side of the rack.
• M6 Machine Screws (Qty 6) 4 screws for fastening the rack rails to the rear side of the rack, and 2 screws for
fastening the switch (rack mounting brackets attached to the side of the switch) to the
front side of the rack).
• CD-ROM It contains the Firmware and User Guid e (in a PDF format) necessary for operating and
conguring the switch. Adobe Reader is required for viewing.
• EULA End User License Agreement for the Product
1.1.2 Installation of Switch: Front Access or Rear Access (User
Congured Airow)
There are two options available to install the switch in a dierent direction in a rack that helps suppress heat interference,
depending on user’s requirements
• Rear-Access Conguration (Factory Default)
The interface side (SFP+ slots) is facing backward in a rack, which serves better for connecting the switch to
equipment whose interface side is also located in the backside of the rack such as servers.
• Front-Access Conguration (User Congured)
The interface side (SFP+ slots) is facing forward in a rack, which serves better for connecting the switch to equipment
whose interface side is facing forward such as other switches, routers, etc.
Choose either of the above to install the switch in the rack, depending on user’s requirements.
Note
• USB memory is not included in the product package
Reference
See "2.2.1 Decide Switch Access Conguration" (pg.29) for the detailed instructions for installation.