Filter
Top Products
XG2600 Hardware Guide Chapter 1 Getting Started
How to attach Cable Holder (Cable Restraints with Tyraps)
24
1.2 How to attach Cable Holder (Cable
Restraints with Tyraps)
The Cable Holder prevents the power cable from being accidently pulled out of the switch.
Below describes how to attach Cable Holder to the power code.
W arning
In case of installing the switch in a lockable rack and fixing the power cable with the attached
Cable Holder, use service outlet in the rack.
In case of using outlet outside of the rack, be sure to fix the power cable separately inside the
rack.
If the power cable is tensioned from outside, unexpected pressure is given to Cable Holder,
causing disconnected cable and loose connection, which then cause electric shock and fire.
1. Attach Cable Holder to the switch first.
2. Fasten the moving part of Cable Holder to the joint of the power cable.
CableHolder
Movingpart