Filter
Top Products
XG2600 Hardware Guide Chapter 2 Installation
Installation of the switch
41
Attach rack mounting brackets to the switch
1. Attach rack mounting brackets to fit either a standard front position of the rack or a offset position of
the rack.
Precautions
PSUs have to always be located in the rear side of the rack. If the position of PSUs is not appropriate, rack mounting
brackets cannot be attached to the switch properly. Check the PSU configuration.
Install the switch in a 19" rack
The switch can be installed and operated in the EIA standard 19" rack.
Reference
" Install the switch in a 19” rack" (pg.34)
[STANDARD]
[OFFSET]
RackMountingClamps
XG2600
XG2600
Plugintothehole
ofthedevice.