Filter
Top Products
XG2600 Hardware Guide Chapter 2 Installation
Connecting a Setup PC
50
2.4 Connecting a Setup PC
This is to connect a set up PC to the console port of the switch using RS232C cable.
Necessary Hardware / Software
Please prepare the hardware & software specified below to connect to the switch.
• Personal Computer
1 unit of personal computer for setting up configuration is required.
• RS232C cable (Cross, D-SUB9 pin)
RS232C cable is required to connect the set up PC to the switch.
Also, please use the console cable which is included in this product for connection.
• Communication Software
Terminal software is required.
Connect RS232C Cable
1. Confirm power of both the PC and the switch are off.
2. Connect the RS232C cable and the console cable which is included in this product, and firmly fix
them with the screw.
3. Plug in the RJ45 plug of the console cable to the console port of the switch.
Precautions
Please use cross cable for RS232C cable.
Reference
User’s Guide "1.1.5 Console Port Specifications" (pg.28)