Filter
Top Products
Basic Configuration
24 EN/LZT 108 6492 R2 - October 2003
5.2 Configuring PPP Interfaces
When powered on, the HM210dp/di initiates a connection through your DSL
line to your ISP.
The Point-to-Point (PPP) protocol is commonly used between ISPs and
their customers to identify and control various communication properties,
including:
Identifying the type of service the ISP provides to a given customer.
Identifying the customer to the ISP through a username and
password login.
Enabling the ISP to assign Internet information to the customer’s
computers.
Your ISP may or may not use the PPP protocol. Contact your ISP to
determine if you will need to change the default settings in order to connect
to their server.
5.2.1 Adding PPP Interfaces
If you intend to use more than one type of service from your ISP, the device
can be configured with multiple PPP interfaces, each with unique logon and
other properties.
Follow this procedure to define properties for a PPP interface:
1. Select WAN > PPP to display the Point to Point Protocol (PPP)
Configuration page.