Filter
Top Products
Configuring DNS Server Addresses
EN/LZT 108 6492 R2 - October 2003
73
You can configure the DNS server address to be relayed on the
modem if one of the following circumstances applies:
Not using PPP connection to the ISP (or a protocol other
than PPP is used, such as EoA).
You use PPP connection and “Use DNS” is already
Enabled. Then these configured addresses will be used in
addition to those DNS addresses learned through PPP.
You use PPP connection and “Use DNS” is Disabled. Then
these configured addresses will be used.
Go to Service > DNS to display the DNS Configuration page:
Type the IP address of the DNS server in an empty row and click
Add. Click the “Enable” radio button, and then click the Sumbit
button.
Select Admin > Commit & Reboot and click the Commit button
to save your changes to permanent storage.