Filter
Top Products
Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05)
42
www GarrettCom com
..
at a later date. In the event there are items missing or damaged, contact your
supplier. If you need to return the unit, use the original shipping container if
possible. Refer to Chapter 5 for specific return procedures.
5.2 6KPM Module Description
An important feature of the Magnum 6K32T is the use of one Port
Modules for flexible mixed-media connectivity to RJ-45 and fiber media in the
modular slot. Since the Magnum 6K32T Switches have dual-speed capability
for copper ports, the 6 or 8-port interfaces are designed to support all standard
Ethernet media types at 10 or 100Mps speed. Each 6K32T PM can provide
two, four, six or eight ports for connecting Ethernet segments with its
individual connector type and media.
For a list of 6K32T Port Module types, refer to Section 1.2
Each 6K PM is individually described in the following sections.
NOTE:
The port #1 on the RJ-45 ports on all the modules, either all
RJ-45 ports or used for COMBO module is set as (=) as other ports.
5.2.1 6KP6-RJMST, 4@10/100Mbps RJ-45 and 2@100Mb multi-mode
FX-ST “twist lock” Combo Module
The Magnum 6KP6-RJMST is a combo 6 port module of RJ-45’s at
10/100Mbps and fiber optic ports at 100MB. The Combo module is equipped with dual-
mode ST-type connectors and
dual speed copper ports. The
ST-connector functions as a
fiber optic transceiver to
support 100BASE-FX network
segments. When installed in a
Magnum 6K32T Managed
Switch, the copper port
supports the standard distance
100m on each port and the fiber
port supports fiber optic cable distances up the IEEE-standard 100Mbps distance limits,
i.e., typically 2km at full-duplex and 412m at half-duplex.
4
FULL/HALF
1
ACTIVITY
LINK
2
4
3
3
10/100
1 3 5 7
2 6TX RX
TX LK RX
LK
ACT
F/H
ACT
F/H
10/100
LK
F/H
ACT
2
1
6KP6-RJMST,
4 Port@ 10/100Mbps and 2 @100 Mb ST Fiber Port