Magnum 6K32 & 6K32T Managed Switch Installation and User Guide (12/05)
52
www GarrettCom com
..
1@ 1000Mb Fiber SC + 2@ 100Mb SC
The two Giga port has been offered as GBPM-2OTX (fiber or RJ-45), whereas the single
Gigabit module comes in flavor of G+4(10/100 RJ-45 ports) or G+2 (100Mb fiber ports)
as shown below in the above figure.
Each port has an Activity (ACT) LED indicating packets being received and a link (LK)
LED indicating proper connectivity with the remote device when lit.
5.2.11a GBPM-2OTX, Two Gigabit fiber (1000Mb), multi-mode SC
Connector
The Magnum GBPM-2OTX is a dual Gigabit fiber module option can be
configured with either Single or multi-mode SC type connectors by easily snapped in and
out. The Gigabit fiber ports are most popular as server-to-switch and switch-to-switch
applications. It supports cable distances up to the IEEE 802.3z standard 1000Mbps
distance limits, i.e., 10,25, 40 or 70Km at full duplex, and depend upon the Gigabit
modules used.
TX LK RX
ACT
F/H
LK
ACT
F/H
TX RX
LK
2
LK
ACT
F/H
1
TX LK RX
ACT
F/H
TX LK RX
ACT
F/H
LK
ACT
F/H
LK
ACT
F/H
TX RX
LK TX RXLK
2
LK
ACT
F/H
LK
ACT
F/H
1
2@ 1000Mb Fiber SC
The two Giga port has been offered as GBPM-2OTX (fiber or RJ-45), whereas the single
Gigabit module comes in flavor of G+4(10/100 RJ-45 ports) or G+2 (100Mb fiber ports)
as shown below in the above figure.
Each port has an Activity (ACT) LED indicating packets being received and a link (LK)
LED indicating proper connectivity with the remote device when lit.
TX RXL
ACT
F/
TX LK RX
ACT
F/
TX RXLK
ACT
F/