Filter
Top Products
30 Replacing and Adding Drives
5 From the rear of the drive cage, push the diskette drive toward the front
of the chassis and through the front bezel.
6 Place the new drive into the drive cage. Make sure the threaded holes
on the diskette drive align with the locking tab holes on the drive cage.
7 Replace the drive locking tab.
8 Connect the power and data cables to the drive.
9 Replace the right panel. (See “Replacing the side panels” on page 23 for
instructions.)
10 Reconnect the power cord and all other cords you removed, then turn
on the system.
Diskette
drive
05960.book Page 30 Monday, February 21, 2000 2:47 PM