Filter
Top Products
40 Replacing and Adding Drives
9 Align the drive tray rails with the side channels in the hard drive cage,
then slide the drive tray into the hard drive cage.
10 Push the drive tray into the drive cage until the release tabs snap into
place.
11 Connect the power and data cables to the drive.
12 Replace the right panel. (See “Replacing the side panels” on page 23 for
instructions.)
13 Reconnect the power cord and all other cords you removed, then turn
on the system.
Drive tray rails
Harddrive
05960.book Page 40 Monday, February 21, 2000 2:47 PM