Filter
Top Products
46 System Components
To install DIMMs:
1 Turn off the computer, disconnect the power cord, and disconnect the
modem cord, if your computer has a modem.
2 Open the case by following the instructions on page 19, observing the
static electricity precautions on page 17.
3 Remove the drive cage so that you can access the DIMM sockets. (See
page 26 for instructions on removing the drive cage.)
4 Pull open the socket clamps on each side of the DIMM socket and lift
the DIMM out of the socket.
Caution Never try to remove a DIMM without releasing the clamps.
You may break the socket, causing serious damage.
05960.book Page 46 Monday, February 21, 2000 2:47 PM