Filter
Top Products
Replacing Convertible Notebook Components
8
Replacing the CMOS battery
Tools you need to complete this task:
v
To replace the CMOS battery:
1 Complete the steps in “Preparing the convertible notebook” on page 5.
2 Loosen the two memory bay cover screws that secure the memory cover. (These screws
cannot be removed.)
3 Remove the memory bay cover. Be careful not to break off the tabs located on the bottom
of the cover. If the cover does not remove easily, wiggle the cover to loosen it.
Important
Use only CMOS batteries designed for this Gateway convertible notebook.
Flat-blade driver Scribe or non-marring tool- OR -
Phillips #0 screwdriver
Memory
bay
Screw
Screw