Filter
Top Products
www.gateway.com
69
12 Carefully separate the front and back of the LCD panel assembly.
13 Remove the four screws that connect the indicator/button board to the LCD panel assembly
back.
14 Lift the indicator/button board off of the LCD panel assembly back, then turn it over.
15 Disconnect the two cables from the old indicator/button board.
16 Connect the two cables to the new indicator/button board.
17 Replace the indicator/button board, then replace the four screws removed in Step 13.
18 Press the two halves of the LCD panel front and back together in several places until they
click in place. You should find no loose spots or spots where the two halves do not meet.
19 Replace the eight LCD panel assembly screws removed in Step 11.
20 Replace the eight rubber inserts removed in Step 10.
Caution
The fingerprint reader cable connects the two halves. Lay the front of the LCD
panel assembly beside the back half.
Screw
Screw
Screw
Screw