Filter
Top Products
www.gateway.com
35
Replacing the system board
Tools you need to complete this task:
v
Screws removed during this task:
To replace the system board:
1 Complete the steps in “Preparing the convertible notebook” on page 5.
2 Remove the memory by following the steps in “Adding or replacing memory modules” on
page 6.
Flat-blade driver Scribe or non-marring tool- OR -
Phillips #0 screwdriver
2 black 2.0*3.0 (IEEE
802.11 wireless card)
1 black 2.5*3.0 (DVD
drive)
3 black 2.5*6.0 (Palm
rest-top)
3 black 2.5*4.5 (System
board)
7 black 2.5*4.5 (Palm
rest-bottom)
2 black 2.0*6.0 (Palm
rest-bottom)
3 black 2.5*3.0 (Palm
rest-DVD drive bay)
3 black 2.5*2.2 (Palm
rest-hard drive bay)
2 black 2.5*3.0 (hard
drive)