Filter
Top Products
Replacing Convertible Notebook Components
34
9 Remove the old USB/Firewire board from the convertible notebook.
10 Place the new USB/Firewire board into the convertible notebook. The holes in the board
should fit around the posts in the bay.
11 Connect the USB/Firewire cable to the USB/Firewire board.
12 Replace the palm rest by following the steps in “Replacing the palm rest” on page 25.
13 Replace the hard drive by following the steps in “Replacing the hard drive” on page 17.
14 Replace the DVD drive by following the steps in “Replacing the DVD drive” on page 14.
15 Replace the wireless bay cover by following the steps in “Replacing the IEEE 802.11 wireless
card” on page 10.
16 Replace the memory bay cover by following the steps in “Adding or replacing memory
modules” on page 6.