Filter
Top Products
Replacing Convertible Notebook Components
78
To replace the LCD assembly lid:
1 Complete the steps in “Preparing the convertible notebook” on page 5.
2 Remove the memory bay cover by following the steps in “Adding or replacing memory
modules” on page 6.
3 Disconnect the wireless antenna wires by following the steps in “Replacing the IEEE 802.11
wireless card” on page 10.
4 Remove the DVD drive by following the steps in “Replacing the DVD drive” on page 14.
5 Remove the hard drive by following the steps in “Replacing the hard drive” on page 17.
6 Remove the hinge cover by following the steps in “Replacing the hinge cover” on page 23.
7 Remove the palm rest by following the steps in “Replacing the palm rest” on page 25.
8 Remove the system board by following the steps in “Replacing the system board” on page 35.
9 Remove the LCD assembly by following the steps in “Replacing the LCD assembly” on page 51.
10 Disconnect the fingerprint cable by following the instructions in “Replacing the fingerprint
reader” on page 54.
11 Remove the indicator/button board by following the instructions in “Replacing the
indicator/button board” on page 67.
12 Remove the inverter by following the instructions in “Replacing the inverter” on page 71.
13 Remove the four screws connecting the LCD panel to the LCD lid.
Screw
Screw
Screw
Screw