www.gateway.com
47
Opening the case
Your computer case provides easy access to internal
components.
Removing the side panel
To remove the side panel:
1 Follow the instructions in “Preventing static electricity
discharge” on page 46.
2 Shut down your computer, then disconnect the power
cord and modem, network, and all peripheral device
cables.
3 Press the power button for ten seconds to drain any
residual power from your computer.
4 Remove the security tape (if any) on the rear edge of the
side panel.
5 Remove the case cover thumbscrew on the side panel.
Warning
To avoid exposure to dangerous electrical voltages and moving parts, turn
off your computer, then unplug the power cord and modem cable before opening
the case.
Thumbscrew
8513162.book Page 47 Tuesday, May 20, 2008 4:09 PM