www.gateway.com
65
9 Reconnect the power supply cables using your notes
from Step 2.
10 Replace the side panel by following the instructions in
“Replacing the side panel” on page 50.
Replacing the heat sink and
processor
To replace the heat sink and processor:
1 Remove the side panel by following the instructions in
“Removing the side panel” on page 47.
2 For more stability, place your computer on its side. To
avoid scratching the case, place it on a towel or other
non-abrasive surface.
3 Remove the fan cover by holding cables out of the way
and pulling the cover away from the computer.
Tools
You need a Phillips screwdriver to replace the heat sink.
8513162.book Page 65 Tuesday, May 20, 2008 4:09 PM